Description and application
ProFast Flooring is an autocatalytic floor coating based on polyurea combinations. This unique floor coating is colour-fast and can be used for in- and outside applications. ProFast Flooring is up to 3 times more wear and scratch-resistant than epoxy and polyurethane coatings, cures fast and can be applied with a roller or brush.
The quick-curing time makes ProFast Flooring ideal for walkways, balconies, terraces and stairwells. It also can be used in warehouses, distribution centres and production facilities.
Based on ProFast technology, decorative systems can be applied. ProFast Flooring is also available as an anti-slip coating.
Properties
- Quick curing
- Zero shrinkage and almost odourless
- Colour-fast (aliphatic) and UV proof
- Excellent preservation of colour and gloss
- For out- and indoor applications
- Can be applied without a primer most of the time
- Good chemical resistance
- Up to 3 times more wear and scratch resistant than traditional flooring systems
- Resistant against plasticizers
Description and application
ProFast Topcoat 70-C (colour) is an autocatalytic, low-solvent topcoating based on polyurea combinations. This topcoat can be used for in- and outdoor applications.
The quick-curing time makes ProFast Topcoat 70-C ideal for walkways, balconies, terraces and stairwells. It also can be used in warehouses, distribution centres and production facilities.
Properties
- Quick curing
- Zero shrinkage and almost odourless
- Completely solvent-free
- Colour-fast (aliphatic) and UV proof
- Excellent preservation of colour and gloss
- Completely water resistant
- For out- and indoor applications
- Very low dirt absorption
- Good chemical resistance
- Up to 3 times more wear and scratch resistant than traditional flooring systems
- Resistant against plasticizers
Description and application
ProFast Topcoat 80-FS is an autocatalytic, solvent-free topcoating based on polyurea combinations. ProFast Topcoat 80-FS has quick-curing properties and has been certified by TNO for the storage of dry substances for food preparation and food contact. It can be used for in- and outdoor applications.
Properties
- Quick curing
- Zero shrinkage and almost odourless
- Completely solvent-free
- Colour-fast (aliphatic) and UV proof
- Excellent preservation of colour and gloss
- Completely water resistant
- For out- and indoor applications
- Very low dirt absorption
- Good chemical resistance
- Up to 3 times more wear and scratch resistant than traditional flooring systems
- Resistant against plasticizers
Description and application
ProFast Casting Resin TR is a 2-component, cold-setting, casting resin. The compound is based on light stable hybrid polyurea chemistry. The low viscosity makes mixing and casting very easy. The product is free from plasticizers and solvents.
- Casting high quality translucent films as a protective layer on many metals, wood and synthetics.
- As a protective layer on “photo print” flooring.
- To cast fully translucent moulds.
- Encapsulation resin for many products.
- Binder for colour quartz flooring used outdoors.
- Binder for rubber granulate.
Properties
- De-foaming properties are optimized and therefore it’s easy to cast highly transparent films and mouldings. Moisture and air do not need to be removed by vacuum
- Adhesion is possible on most surfaces without using primers
- ProFast Casting Resin TR is highly wear and scratch resistant
- It’s possible to add special colourants to achieve special translucent or fully opaque effects
Description and application
Rocapox Flooring R is a high-quality, 2-component, solvent-free floor coating based on epoxy. Suitable as a durable, seamless, coloured coating for cement-bonded and anhydrite sub-floors. Can be used as a finish for:
- Warehouses
- Workshops
- Garages
- Parking garages
- Showrooms
Rocapox Flooring R has a good resistance to chemicals.
Properties
- Solvent-free
- Large layer thickness range
- Liquid proof
- Wear-resistant
- Seamless
- Easy to apply
- Free of nonylphenol
- Available in many colours
- Easy to clean
- Resistant against plasticizers
Description and application
Rocapox Flooring RP is a high-quality, 2-component, solvent-free, roll/cast floor coating based on epoxy. Suitable as a durable, seamless, coloured coating. Can be used as a finish in:
- Warehouses
- Workshops
- Garages
- Parking garages
- Showrooms
- Archives
Rocapox Flooring RP has a good resistance to chemicals. Consult the chemical resistance list from this product.
Properties
- Solvent-free
- Large layer thickness range
- Wear-resistant
- Seamless
- Easy to apply
- Free of nonylphenol
- Available in many colours
- Easy to clean
- Resistant against plasticizers
Description and application
Rocapox Flooring TR12 is a high-quality floor coating/sealer based on renewed epoxy technology. This product is easy to apply and is solvent-free.
This floor coating is suitable as a durable coating with high filling porperties, as a seal layer for epoxy systems littered with quartz and as transparant seal layer for epoxy mortar flooring.
This product can be applied in almost every space because it is solvent-free. Rocapox Flooring TR12 is chemical resistant. Consult the chemical resistance list from this product.
Properties
- Large layer thickness range
- Wear-resistant and (somewhat) scratch resistant
- Liquid proof
- Chemical resistant
- Easy to clean
- Does not soften at high temperatures <60 ºC
- Easy to apply with a brush or roller
Description and application
Rocapox Flooring WD-600 is a satin, waterborne epoxy coating. This product is saponification resistant, easy to apply and based on specially selected epoxy combinations.
This floor coating is suitable as an universal floor coating for warehouses, workshops, garages etc. Very suitable for surfaces where a slight degree of liquid barrier and/or good cleanability is required.
This product can be applied in almost every space because it is waterborne. Rocapox Flooring WD-600 is chemical resistant. Consult the chemical resistance list from this product.
Properties
- Vapor-open
- Non-saponifiable
- Wear-resistant and (somewhat) scratch resistant
- Somewhat chemical resistant
- Easy to clean
- Does not soften at high temperatures <60 ºC
- Over time, a slight discoloration may occur which is common for epoxy products
Description and application
Rocapox Flooring WD-600 TR is a satin, transparent, waterborne epoxy coating. This product is saponification resistant, easy to apply and based on specially selected epoxy combinations.
This floor coating is suitable as a binder to make cement-based floors dust-free and as an universal floor coating for warehouses, workshops, garages etc. Very suitable for surfaces where a slight degree of liquid barrier and/or good cleanability is required.
This product can be applied in almost every space because it is waterborne. Rocapox Flooring WD-600 TR is chemical resistant.
Properties
- Vapor-open
- Non-saponifiable
- Wear-resistant and (somewhat) scratch resistant
- Somewhat chemical resistant
- Easy to clean
- Does not soften at high temperatures <60 ºC
- Over time, a slight discoloration may occur which is common for epoxy products
Description and application
2-component, solvent-containing, satin topcoating providing exceptionally durable protection, based on a special hydroxyl component and an aliphatic isocynate hardener
A very durable protection for synthetic flooring (polyester, polyurea, polyurethane, epoxy) as well as concrete structures, such as viaducts, bridges, concrete strips, pillars, etc. in aggressive environments (industrial areas, cities etc).
Rocathaan Topcoat UP2 is also suitable as a finish on many surfaces as well as sealing littered surfaces.
Properties
- Very high CO2 resistance against atmospheric contamination and various chemicals
- High mechanical resistance
- Smooth and tight topcoat that gives dirt little chance of adhering and makes the surface easy to clean.
- Thanks to the very low water absorption properties, it is excellent to use as a seal against penetrating moisture
- UV-resistant, therefore, gloss and colour are maintained
- Non-thermoplastic, therefore, the surface remains hard even at higher temperatures
- Easy to apply, also with a roller and brush
Description and application
2-component, solvent-containing, eggshell gloss topcoating providing exceptionally durable protection, based on a special hydroxyl component and an aliphatic isocynate hardener.
A very durable protection for synthetic systems, including polyurea, polyurethane and epoxy, as well as concrete structures, such as viaducts, bridges, concrete strips, pillars, etc. in aggressive environments, as well as steel, whether or not in combination with a rust-inhibiting primer.
Not suitable for coating littered surfaces.
Properties
- Very high CO2 resistance against atmospheric contamination and various chemicals
- High mechanical resistance
- Smooth and tight topcoat that gives dirt little chance of adhering and makes the surface easy to clean.
- Thanks to the very low water absorption properties, it is excellent to use as a seal against penetrating moisture
- UV-resistant, therefore, gloss and colour are maintained
- Non-thermoplastic, therefore, the surface remains hard even at higher temperatures
Description and application
2-component, sprayable, solvent-containing, eggshell gloss topcoat providing exceptionally durable protection, based on a special hydroxyl component and an aliphatic isocynate hardener.
A very durable protection for synthetic systems, including polyurea, polyurethane and epoxy, as well as concrete structures, such as viaducts, bridges, concrete strips, pillars, etc. in aggressive environments, as well as steel, whether or not in combination with a rust-inhibiting primer.
Not suitable for coating littered surfaces.
Properties
- Very high CO2 resistance against atmospheric contamination and various chemicals
- High mechanical resistance
- Smooth and tight topcoat that gives dirt little chance of adhering and makes the surface easy to clean.
- Thanks to the very low water absorption properties, it is excellent to use as a seal against penetrating moisture
- UV-resistant, therefore, gloss and colour are maintained
- Non-thermoplastic, therefore, the surface remains hard even at higher temperatures
- Perfect for coating walls where HACCP guidelines apply
Description and application
2-component, sprayable, transparent, solvent-containing, eggshell gloss topcoat providing exceptionally durable protection, based on a special hydroxyl component and an aliphatic isocynate hardener.
A very durable protection for synthetic systems, including polyurea, polyurethane and epoxy, as well as concrete structures, such as viaducts, bridges, concrete strips, pillars, etc. in aggressive environments, as well as steel, whether or not in combination with a rust-inhibiting primer.
Not suitable for coating littered surfaces.
Properties
- Non-yellowing
- UV-resistant
- Very high CO2 resistance against atmospheric contamination and various chemicals
- High mechanical resistance
- Smooth and tight topcoat that gives dirt little chance of adhering and makes the surface easy to clean.
- Thanks to the very low water absorption properties, it is excellent to use as a seal against penetrating moisture
- Non-thermoplastic, therefore, the surface remains hard even at higher temperatures
Description and application
2-component, sprayable, solvent-containing, eggshell gloss topcoat providing exceptionally durable protection, based on a special hydroxyl component and an aliphatic isocynate hardener.
A very durable protection for synthetic systems, including polyurea, polyurethane and epoxy, as well as concrete structures, such as viaducts, bridges, concrete strips, pillars, etc. in aggressive environments, as well as steel, whether or not in combination with a rust-inhibiting primer.
Compared to the Rocathaan Topspray 35, this topspray has no fillers and a higher coverage ratio. Not suitable for coating littered surfaces.
Properties
- Non-yellowing
- UV-resistant
- Very high CO2 resistance against atmospheric contamination and various chemicals
- High mechanical resistance
- Smooth and tight topcoat that gives dirt little chance of adhering and makes the surface easy to clean.
- Thanks to the very low water absorption properties, it is excellent to use as a seal against penetrating moisture
- Non-thermoplastic, therefore, the surface remains hard even at higher temperatures
Description and application
A strong, transparent, waterborne, 2-component topcoating. Rocathaan Topcoat 20 is a permanent topcoating for long-lasting protection. Suitable as a wear-resistant, non-yellowing finish for synthetic floors.
This topcoat is available with a mat or satin finish and is also suitable for use on mineral surfaces for indoor and outdoor use, metals, wood and coated surfaces.
Rocathaan Topcoat 20 can be thinned with 5% demineralized water if desired.
Properties
- Non-resistant against plasticizers
- Very low dirt absorption
- Non-yellowing
- Good wear and scratch resistant
- Resistant to a variety of chemicals
Description and application
A strong, coloured, waterborne, 2-component topcoating. Rocathaan Topcoat 20-C is a permanent topcoating for long-lasting protection. Suitable as a wear-resistant, non-yellowing finish for synthetic floors.
This topcoat is available with a mat or satin finish and is also suitable for use on mineral surfaces for indoor and outdoor use, metals, wood and coated surfaces.
Rocathaan Topcoat 20-C can be thinned with 5% demineralized water, if desired.
Properties
- Non-resistant against plasticizers
- Very low dirt absorption
- Non-yellowing
- Good wear and scratch resistant
- Resistant to a variety of chemicals
Description and application
Prokol FireGuard Pro 200 is a primerless application or high-solid 2 K coating based on polyurea combinations. Prokol FireGuard Pro 200 has been developed to achieve an excellent and safe reaction with fire, combined with easy cleanability and high UV resistance. Fireguard has fire class A2-s1,d0. This products has easy cleanability and high UV resistance and is suitable for coating mineral surfaces, metals, wood and plasterboard.
Prokol FireGuard Pro 200 is suitable for:
- Ceilings, floors and walls in public buildings
- Stairwells
- Facades
This product reaches optimal properties when it comes to fire safety, mechanical properties and weather resistance with a layer thickness of 150 micron.
Prokol FireGuard Pro 200 curing quickly at room temperature.
Properties
- Safe in combination with fire
- Wear resistant
- Easy to clean
- Anti-corrosion
- Cures quickly under most circumstances
