Description and application
2-component, solvent-free screed based on lightly elastic polyurethane combinations.
As a screed underneath polyurethane cast floors to smooth surfaces and eliminate irregular structures in the surface after a primer has been applied.
Properties
- Easy to apply
- Seals the surface air tight
- Filling capacity
Description and application
Slightly elastic, polyurethane-based, 2-component, solvent-free, synthetic flooring with exceptional wear-resistant properties for the finishing of floors in the construction, industrial and bodywork sectors.
A very durable and slightly flexible, abrasion proof floor coating for flooring in warehouses, workshops, balconies, terraces, walkways, sanitary areas, kitchens, the food industry and related applications. If desired, the product can be impregnated with decorative decochips or mineral anti-slip grains.
Properties
- A comfortable finish due to its elasticity
- Chemical, impact and wear resistant
- Completely waterproof
- Non-thermoplastic to retain surface hardness even at high temperatures
- Easy to clean
- Zero emissions
- Good processing properties (long processing time)
- Greatly improved flow properties
Description and application
Emission-free, 2-component, solvent-free, semi-gloss, aromatic polyurethane casting floor based on “renewable resources”. This casting floor can be used as a wear-resistant and decorative floor, has a shore hardness of approx. D60 and can be used for various areas and applications, including:
- Laboratories
- Printing companies
- Storage buildings
- Canteens
- Technical rooms
- Residential premises
This product can be used with single or multiple colour combinations, or sprinkled with colour chips and/or decorative chips. A fine anti-slip coating finish is also available. A transparent topcoating provides this polyurethane synthetic flooring with a good protective layer.
Properties
- A comfortable finish due to its elasticity
- Resistant against normal chemicals
- Impact and wear resistant
- Completely waterproof
- Non-thermoplastic to retain surface hardness even at high temperatures
- Easy to clean
- Zero emissions
- Good processing properties (long processing time)
- Greatly improved flow properties
Description and application
Emission-free, 2-component, solvent-free, semi-gloss, UV-resistant, aliphatic polyurethaan casting floor which has wear-resistant, decorative and crack-bridging properties. This casting floor is suitable for underfloor heating, has a shore hardness of approx. A85 and can be used for various areas and applications, including:
- Apartment buildings
- Offices
- Health institutions
- Museums
- Residential premises
- Libraries
This product can be used with single or multiple colour combinations, or sprinkled with colour chips and/or decorative chips. A fine anti-slip coating finish is also available. A transparent topcoating provides this polyurethane synthetic flooring with a good protective layer.
Properties
- In almost all colours available
- Resistant against normal chemicals
- Impact and wear resistant
- Completely waterproof
- Non-thermoplastic to retain surface hardness even at high temperatures
- Easy to clean
- Good processing properties (long processing time)
- Greatly improved flow properties
Description and application
2-component, solvent-free, screed with a tough-elastic polyurethane base. Can be used as an aggregate binder to realise an anti-slip finish on drivable/walkable surfaces. Suitable for various areas and applications, including;
- Parking decks
- Driveways
- Ramps
- Foot traffic areas
- Platforms
- Bridges
- Galleries and terraces
- RORO-decks
The screed layer can be used as an protective finish for synthetic membranes and can be used as a binder for littered systems for waterproofing and mastic asphalt finishes.
Properties
- Resistant against atmospheric influences and certain range of chemicals.
- Good adhesion with mineral materials
- Non-thermoplastic to retain surface hardness even at high temperatures
Description and application
2-component, solvent-free, castable, sealing membrane based on polyurea technology with crack-bridging and wear-resistant properties.
Can be used on rooftop car parks, slip roads, exits, bridge decks, balconies, terraces, galleries, rooftop gardens and floors.
Properties
- Crack-bridging (depends on layer thickness)
- Highly flexible with tensile strength
- High crack resistance
- Can be finished in colours
- Vapour-permeable but liquid-proof
- Chemical-resistant
- Large range in layer thickness
Description and application
2-component, solvent-free screed based on epoxy combinations.
Suitable as screed for sealing surfaces and for eliminating irregular structures in the surface after a primer has been applied.
Properties
- Easy to apply
- Seals the surface air tight
- Filling capacity
Description and application
2-component, solvent-free, epoxy casting floor with wear-resistant and decorative properties. This casting floor is suitable as finish for cement and plaster-bound surfaces as well as durable finish for various areas and applications, including;
- Warehouses
- Workshops
- Archives
- Garages
- Technical rooms
Rocapox Flooring SL-300 is chemical resistant and can be used with single or multiple colour combinations. Consult the chemical resistance list from this product.
Properties
- Solvent-free
- Large range of layer thickness
- Liquid-proof
- Seamless
- Easy to apply
- Free of Nonylphenol
- Good chemical resistance
- Resistant against plasticizers
